Effortless Setup: Two Ways to Configure Your Macard WiFi Extender
Effortless Setup: Two Ways to Configure Your Macard WiFi Extender
Blog Article
You can set up your Macard WiFi Extender using one of two methods: WPS (Wi-Fi Protected Setup) or Manual setup. Here’s a guide on how to do both.
Setting Up the Macard Extender Using WPS
- Insert the extender into a working power outlet near your router.
- Press the WPS button on the WiFi Extender. The WPS LED will begin blinking, indicating that the extender is looking for a connection.
- Press the WPS button on your router to initiate the pairing process.
- Wait until the WPS/WiFi LED becomes solid, signaling that the connection is successful.
- Once connected, unplug the extender and place it in a location between your router and areas with weak WiFi coverage, ensuring it’s still within the router’s signal range.
Setting Up the Macard Extender Manually
- Plug the extender into a power outlet within range of your WiFi router.
- Connect your computer to the extender’s WiFi network using the SSID credentials provided.
- Open a web browser and enter the IP address 192.168.10.1 or the URL gomacard.online.
- A login page will appear. Enter the default password (admin) to access the interface.
- Click the LOGIN button to access the dashboard. Select your router’s network from the list of available options.
- Enter your router’s security key and connect the extender. Then, create a new WiFi network by specifying a WiFi name and password.
- Click SAVE to apply your settings.
- By following either the WPS or manual method, you can successfully set up your Macard WiFi Extender.